Revision as of 20:22, 4 April 2022

Page Updated:   2022-04-04

Main Page: API:Script Index

MagicMaster API provides functions for AD&D-2E (though 5e and other spells could be added) to manage all types of magic, including Wizard & Priest spell use and effects; Character, NPC & Monster Powers; and discovery, looting, use and cursing of Magic Items. It's a part of the RPGMaster suite of APIs.

All magical aspects can work with the RoundMaster API to implement token markers that show and measure durations, and produce actual effects that can change character sheet attributes temporarily for the duration of the spell or permanently if so desired. They can also work with the InitiativeMaster API to provide menus of initiative choices and correctly adjust individual initiative rolls, including effects of Haste and Slow and similar spells. Spells can summon weapons to hand via the AttackMaster API and change bonuses on attacks and damage, by weapon or for one or more party members. This API can also interact with the MoneyMaster API (under development) to factor in the passing of time, the cost of spell material use, the cost of accommodation for resting, and the cost of training for leveling up as a spell caster (Wizard, Priest or any other).

Specification for spells, magic items, weapons, armour & shields are implemented as ability macros in specific database character sheets. This API comes with a wide selection of such specifications, held in databases that are created and updated automatically when the API is run. The GM can add to the provided items in the databases using standard Roll20 Character Sheet editing, following the instructions provided in the relevant database wiki pages.

Forum

RPGMaster Forum

What MagicMaster does

How to use MagicMaster

Installation and Configuration

Copy the script's code, available either via the Roll20 One-Click Install system, or from the menu on the right and stored at Roll20's API GitHub Repository and paste the code into a new script in your campaign's API Script Editor. Save the new script and it will be available inside your campaign. It will install several new Character Sheets and Handouts: The handout MagicMaster Help provides a full manual of how to use MagicMaster. The handout RPGMaster CharSheet Setup provides information on setting up a character sheet for use with MagicMaster and the rest of the RPGMaster API series. The handout Magic Database Help provides information on use and adding to the Magic Item, Spell & Power databases.

Script Use

After installing the script, refer the the handout MagicMaster Help for full information on use. Below is a copy of the contents of that handout.

Syntax

The MagicMaster API is called using !magic (or the legacy command !mibag).

!magic --help

Commands to be sent to the MagicMaster API must be preceded by two hyphens '--' as above for the --help command. Parameters to these commands are separated by vertical bars '|', for example:

!magic --mi-power token_id|power_name|mi_name|[casting-level]

If optional parameters are not to be included, but subsequent parameters are needed, use two vertical bars together with nothing between them, e.g.

!magic --cast-spell MI|[token_id]||[casting_name]

Commands can be stacked in the call, for example:

!magic --spellmenu [token_id]|[MU/PR/POWER] --mimenu [token_id]

When specifying the commands in this document, parameters enclosed in square brackets [like this] are optional: the square brackets are not included when calling the command with an optional parameter, they are just for description purposes in this document. Parameters that can be one of a small number of options have those options listed, separated by forward slash '/', meaning at least one of those listed must be provided (unless the parameter is also specified in [...] as optional): again, the slash '/' is not part of the command. Parameters in UPPERCASE are literal, and must be spelt as shown (though their case is actually irrelevant).

Commands

Commands Index

Spell and Power management

--spellmenu [token_id]|[MU/PR/POWER]
--mem-spell (MU/PR/POWER)|[token_id]
--view-spell (MU/PR/POWER)|[token_id]
--cast-spell (MU/PR/POWER/MI)|[token_id]|[casting_level]|[casting_name]
--cast-again (MU/PR/POWER)|token_id|[spell_name]

Magic Item management

--mimenu [token_id]
--edit-mi [token_id]
--view-mi [token_id]
--use-mi [token_id]
--mi-charges token_id|value|[mi_name]|[maximum]
--mi-power token_id|power_name|mi_name|[casting-level]
--mem-spell (MI-MU/MI-PR)|[token_id]
--view-spell (MI-MU/MI-PR/MI-POWER)|[token_id]
--cast-spell MI|[token_id]|[casting_level]|[casting_name]|[CHARGED]|[mi-name]

Spell, power & magic item effects and resting

!rounds --target CASTER|token_id|spell_name|duration|increment|[msg]|[marker]
!rounds --target (SINGLE/AREA)|token_id|target_token_id|spell_name|duration|increment|[msg]|[marker]
--touch token_id|effect-name|duration|per-round|message|marker
--rest [token_id]|[SHORT/LONG]|[MU/PR/MU-PR/POWER/MI/MI-POWER]|[timescale]

Treasure & Item container management

--gm-edit-mi [token_id]
--search token_id|pick_id|put_id
--pickorput token_id|pick_id|put_id|[SHORT/LONG]

Light source management

--lightsources [token_id]
--light token_id|(NONE/WEAPON/TORCH/HOODED/CONTLIGHT/BULLSEYE/BEACON)
--changelight token_id|(NONE/WEAPON/TORCH/HOODED/CONTLIGHT/BULLSEYE/BEACON)

Other commands

--help
--check-db [ db-name ]
--debug (ON/OFF)

Spell management

Display a menu to do actions with spells

--spellmenu [token_id]|[MU/PR/POWER]

Takes an optional token ID and an optional menu type as arguments. If token ID is not specified, uses the selected token.

If the specified token is not associated with a character that has a spell book of the chosen type, or any granted powers, an error message is displayed.

Display a menu to memorise spells from the Character's spell book

--mem-spell (MU/PR/POWER/MI-MU/MI-PR)|[token_id]

Takes a mandatory spell book type and an optional token ID as arguments. If token ID is not specified, uses the selected token.

The Character Sheet associated with the token must have spell books specified for the relevant types of spells or powers. These are lists of spells from the spell macro databases specified by level (powers are all 1 level) and as lists separated by '|'. E.g. Charm-Person|Light|Sleep. If the CommandMaster API is installed, the GM can use its menus to set up character spell books and granted powers. Otherwise refer to the RPGMaster CharSheet Setup handout (created by the API) for how to create these manually.

Initially displays a menu for memorising Level 1 spells (the only level for powers), with a button to choose a spell from the Level 1 spell book on the character sheet, Review the chosen spell, and all the memorising slots the Character has at this level. Other buttons to memorise or remove spells become available when spells or slots are chosen. Another button goes to the next available level with slots. When a granted power is memorised to a slot, a quantity per day can be specified: -1 will grant unlimited uses of the power per day. Memorising any other type of spell is limited to 1 use per slot.

MI-MU and MI-PR have a special function: these are used to cast memorised spells into a spell-storing magic item (which should be the last item selected by the Character running the command), such as a Ring of Spell Storing. Magic Item spells are stored in an unused level of the Character Sheet. This command displays both all memorised spells and all spell-storing magic item spell slots for the item, and allows a memorised spell to be selected, a slot (for the same spell name) to be selected, and the spell cast from one to the other. Generally, this command is called from an API button in the Magic Item macro.

View the memorised spells or granted powers

--view-spell (MU/PR/POWER/MI-MU/MI-PR/MI-POWER)|[token_id]

Takes a mandatory spell type and an optional token ID. If token ID is not specified, uses the selected token.

Displays a menu of all levels of memorised spells of the selected type (there is only 1 level of powers). Spells that have already been cast appear as greyed out buttons, and can't be selected. Spells that are still available to cast that day can be selected and this runs the spell or power macro from the relevant database without consuming the spell, so that the Player can see the specs.

Adding MI- before any of the types of spell views the spells or powers available for the last Magic Item used by the Character using the command. Generally this version of the command is only called from API Buttons from the magic item's ability macro.

Cast a memorised spell or use a granted power

--cast-spell (MU/PR/POWER/MI)|[token_id]|[casting_level]|[casting_name]|[CHARGED]

Takes a mandatory spell type, an optional token ID (if not specified, uses the selected token), an optional casting level, and an optional caster name, and an optional 'CHARGED' command.

This displays a menu of all levels of the memorised spells/powers of the relevant type. MI displays the spell book for spells stored on the last magic item selected by the Character (both MU & PR) and MI-POWER all stored powers in the last selected magic item (this version of the command is generally called using an API Button in the magic item ability macro). The player can select a spell/power and then a button becomes available to cast it, using up that slot/deducting a power charge until the next long rest.

If a casting_level is specified, the spell will be cast as if by a caster of that level, and if a casting_name is specified, that name will be displayed in the spell macro information. These functions are often used for magic items that cast at specific levels of use, or magic artefacts that are named and/or sentient. If these are not specified, the caster name and relevant class level are used. In either case, specified or not, the character's Character Sheet Attributes called @{Casting-name} and @{Casting-level} are set to the values used, and can be used in spell, power, or magic item macros.

If the optional CHARGED parameter is specified (only relevant to spells and powers stored on magic items), this specifies that the Magic Item from which the spell or power is cast is charged, and looses one charge when that cast is made. This is generally the case when the spell or power is on a Scroll. When the charge quantity reaches zero (i.e. all the spells on it have been cast), the item will follow the behaviour determined by its charge type (charged, uncharged, rechargeable, recharging, self-charging) - see section 4.1 for more information on charges and charge types.

Cast the last used spell or power again

--cast-again (MU/PR/POWER)|token_id|[spell_name]

Takes a mandatory spell type, a mandatory token ID and an optional spell name.

This command is used for certain spells and powers that, once cast, allow continuing effects in the same or subsequent rounds, without using additional charges. If the optional spell name is not used, the command just casts again the same spell as the last spell cast by the character associated with the selected token, at the same casting level and casting name. If a spell name is specified, this spell is cast instead as if it were the same spell: this is used where different spell macros are required to specify subsequent spell effects.

Magic Item management

Display a menu of possible Magic Item actions

--mimenu [token_id]

Takes an optional token ID as an argument. If token ID is not specified, uses the selected token.

Displays a menu with the following actions: Use a magic item, Search for magic items & treasure, Store magic items in a container, Edit the contents of a character's magic item bag, and View the contents of a character's magic item bag.

Searching & Storing are explained in section 7.

Edit a Magic Item bag

--edit-mi [token_id]

Takes an optional token ID as an argument. If token ID is not specified, uses the selected token.

Displays a menu similar to editing memorised spells. At the top are buttons to choose different types of magic items which have macros in the magic item databases. The slots available in the bag are shown (with their current contents) and, when magic items and/or slots are chosen buttons become selectable below to store, review, or remove magic items in/from the bag.

Storing a magic item will ask for a number - either a quantity or a number of charges. Magic Items can be of various types: Charged (is used up when reaches 0), Uncharged (a number is a pure quantity that is not consumed), Recharging (regains charges after each long rest), Rechargable (is not used up when reaches 0, stays in bag and can be recharged when the DM allows), Self-charging (recharge at a rate per round determined by the item) and can also be Cursed - more under section 7.

This menu is generally used when Magic Item & treasure containers (such as Treasure Chests and NPCs/monsters with treasure) have not been set up in a campaign as lootable as a means of giving found magic items to characters, the DM just tells the Player that they have found a magic item, and the Player uses this menu to give an item to the Character.

View a Character's Magic Item Bag

--view-mi [token_id]

Takes an optional token ID as an argument. If token ID is not specified, uses the selected token.

Displays a menu of items in the character's magic item bag, with the quantity possessed or the number of charges. Pressing a button displays the named Magic Item specs without using any charges so that the Player can review the specifications of that item. Items for which all charges have been consumed are greyed out, and cannot be viewed as the character can no longer use them. They will become viewable again if they gain charges.

Use a Magic Item from the bag

--use-mi [token_id]

Takes an optional token ID as an argument. If token ID is not specified, uses the selected token.

Displays a similar menu as for viewing the contents of the Magic Item Bag, but when an item is selected, a button is enabled that uses the Magic Item and consumes a charge. Other buttons specified in the item macro might use additional charges to perform additional effects.

Items with 0 quantity or charges left are greyed out, and cannot be selected. When a Charged Item reaches 0 charges left, it is removed from the character's Magic Item Bag automatically. Recharging, Rechargeable and Self-Charging items remain, even when they reach 0 charges. Cursed items also remain.

Add, set or deduct Magic Item charges

--mi-charges token_id|[+/-]value|[mi_name]|[maximum]

Takes a mandatory token ID, a mandatory value preceeded by an optional + or -, and an optional magic item name and optional maximum value as arguments.

Does not display anything but alters the number of current or recoverable charges on an item. By default, alters the last magic item used by the character, or will affect the named magic item. Warning: a character can have two items of the same name, and there is no guarantee which will be affected if the name is used.

Remember: using a Charged, Recharging, Rechargeable or Self-Charging Magic Item will automatically use 1 charge on use. This command is not required in order for that to happen. In addition, that one charge deduction always happens - if an effect of a Magic Item uses 2 charges, only 1 more needs to be deducted.

Note: '-' reduces current remaining charges, '+' adds to the maximum recoverable charges, and no + or - sets the maximum recoverable charges. This command cannot be used to increase the current remaining charges.

Using minus '-' before the value will deduct charges from the current quantity/charges: e.g. if using an optional power of the item that uses more than 1 charge. Using + before the value will add the value to the number of recoverable charges (either overnight or rechargeable), up to any specified maximum (often used for magic items that regain variable numbers of charges overnight). Just using the value without + or - will just set the number of recoverable charges to the given value. This command is not required to recharge self-charging items but can be used to change the maximum number of charges they will self-charge up to.

Use a Magic Item power

--mi-power token_id|power_name|mi_name|[casting-level]

Takes a mandatory token ID, mandatory power name, mandatory magic item name, and an optional casting level as parameters.

Magic Items, especially artefacts, can have their own powers that can be used a specified number of times a day, or at will. This command can be used in API buttons in the Magic Item macro to call on that power. The power name and the magic item name must be specified to select the right power. If a casting level is specified, any relevant impacts on use of the power will be taken into account: it is often the case that magic items use powers at specific levels. If not specified, the item using Character's level is used (user does not need to be a spell caster).

Generally, magic item powers have unique names, though they do not have to. Such magic items require specific setting up by the DM - see section 11.4.

Define the spells a spell-storing Item can store

--store-spells token_id|item_name

GM-only command. Takes a mandatory token_id, and a mandatory item_name for an item that must be in the item table of the character associated with the token with the ID provided.

Will only work for an item in the item table of the character sheet associated with the provided token if it's definition contains the command !magic --cast-spell MI or !magic --cast-spell MI-POWERS, that is an item that can cast the spells that the DM specifies such as a Ring of Spell Storing. If this is not the case, an appropriate message is displayed.

The menu displayed will allow the DM to specify which spells are stored in the item, and at what level they were cast into the item. Spells of multiple levels can be stored, and even a mixture of Wizard and Priest spells can be stored on the same item, if so desired. Any character that acquires the item will be able to cast these spells from the item and, if they can know the spell, can restore the spell using the --mem-spell command.

Store spells in a spell-storing Magic Item

--mem-spell (MI-MU/MI-PR)|[token_id]

Takes a mandatory spell type, an optional Token ID for the character, and an optional magic item name. If token ID is not provided, it uses the selected token. If the magic item name is not provided, uses the last magic item selected, viewed or used by the character represented by the token.

MI-MU and MI-PR mem-spell types are used to cast memorised spells into a spell-storing magic item, such as a Ring of Spell Storing. Magic Item spells are stored in an unused spell level of the Character Sheet (by default Wizard Level 15 spells). This command displays both all the character's memorised spells and the spell-storing magic item spell slots in the last magic item selected by the Character, and allows a memorised spell to be selected, a slot (for the same spell name - limiting the item to only store certain defined spells) to be selected, and the spell cast from one to the other.

Unlike some other menus, however, magic item spell slots that are full are greyed out and not selectable - their spell is intact and does not need replacing. Spell slots that need replenishing are displayed as selectable buttons with the spell name that needs to be cast into the slot.

The level of the caster at the time of casting the spell into the magic item is stored in the magic item individually for each spell - when it is subsequently cast from the spell-storing magic item it is cast as if by the same level caster who stored it.

A spell-storing magic item can hold spells from one or both of Wizard and Priest spells. The database where the spell is defined is also stored in the magic item with the spell, so the correct one is used when at some point in the future it is cast. If, when cast, the system can't find the database or the spell in that database (perhaps the character has been moved to a different campaign with different databases) the system will search all databases for a spell with the same name - this does not guarantee that the same spell will be found: the definition used by a different DM could be different - or the DM may not have loaded the database in question into the campaign for some reason. In this case, an error will occur when the spell is cast.

See Section 11.4 for how spell-storing magic items are defined.

Casting a spell from a spell-storing magic item

--cast-spell MI|[token_id]|[casting_level]|[casting_name]|[CHARGED]|[mi-name]

Takes a mandatory casting type of 'MI', an optional Token ID (if token ID is not provided, it uses the selected token), an optional casting level (which will be ignored in favour of the level of the caster of the spell who cast it into the item), an optional casting name which, if not specified, will be the name of the wielder of the magic item, and an optional magic item name (if not provided, uses name of the last magic item the character selected, viewed or used).

This command works in the same way as for casting other spells. However, spells cast from a spell-storing magic item are not regained by resting - either short or long rests. The only way to regain spells cast from such an item is to cast them back into the item from the character's own memorised spells: see the -mem-spell command above. If the character does not have these spells in their spell book or is not of a level able to memorise them, then they will not be able to replace the spells and will have to get another spell caster to cast them into the item (by giving the item to the other Character and asking nicely for it back again) or wait until they can get the spells.

If the optional parameter 'CHARGED' is used, spells on the magic item are not re-storable. The spells will be deleted after they are all used up and the magic item will not be able to store any more spells. This is mainly used for Scrolls with multiple spells.

Spell, power & magic item effects and resting

If this API is used in conjunction with the RoundMaster API, Magic Items, Spells & Powers can all place status markers on tokens, and also cause real Effects to alter token & character sheet attributes and behaviours: when cast; during each round of their duration; and when they expire. See the RoundMaster documentation for further information, especially on Effects and the Effects Database.

Target spell effects on a token (with RoundMaster API only)

!rounds --target CASTER|token_id|spell_name|duration|[+/-]increment|[msg]|[marker]<br>
!rounds --target (SINGLE/AREA)|token_id|target_token_id|spell_name|duration|increment|[msg]|[marker]

Takes mandatory CASTER, SINGLE or AREA command, a mandatory caster token ID, for SINGLE/AREA a mandatory target token ID, mandatory spell name, duration & increment (preceeded by an optional +/-), and an optional message and optional token marker name.

If using the RoundMaster API, this command targets one, or a sequential set of tokens and applies a token marker to the token for the specified duration number of rounds, with the increment applied each round. The optional message will be shown below that token's turn announcement each round. The marker used will either be the one specified or if not specified a menu to choose one will be shown.

If the Player is not the DM/GM, the system will ask the DM/GM to approve the marker/effect for each token - this allows the DM to make saving throws for monsters/NPCs affected where appropriate.

See the RoundMaster API documentation for full details.

Cast a spell that requires a “touch” attack roll

--touch token_id|effect-name|duration|per-round|[message]|[marker]

Takes mandatory token ID, effect name, duration of the effect, an increment to the duration per round (often -1), an optional message each round for the targeted token, and an optional status marker to use (if not supplied, the DM or user will be asked to select one).

Note: this command requires RoundMaster API to also be loaded, but is a !magic command.

Sets up the Character represented by the specified token ready for an “Attack Roll” to deliver a touch attack for a spell or power or magic item use that requires an attack. The parameters are those that will be passed to the !rounds -target command if the attack is successful (see above).

To use this command, add it as part of a spell, power or MI macro in the appropriate database, before or after the body of the macro text (it does not matter which, as long as it is on a separate line in the macro - the Player will not see the command). Then include in the macro (in a place the Player will see it and be able to click it) an API Button call [Button name](~Selected|To-Hit-Spell) which will run the Ability “To-Hit-Spell” on the Character's sheet (which has just been newly written there or updated by the -touch command).

Thus, when the Player casts the Character's spell, power or MI, they can then press the API Button when the macro runs and the attack roll will be made. If successful, the Player can then use the button that appears to mark the target token and apply the spell effect to the target.

See the RoundMaster API documentation for further information on targeting, marking and effects.

Perform Short or Long Rests

--rest [token_id]|[SHORT/LONG]|[MU/PR/MU-PR/POWER/MI/MI-POWER]|[timescale]

Takes an optional token ID (if not specified, uses the selected token), an optional rest type, short or long, an optional magic type to regain charges for, and an optional timescale for days passing.

Most magic requires the character to rest periodically to study spell books, rememorise spells, and regain powers and charges of magic items. This command implements both Short and Long rests.

The type of rest (short or long) can be specified or, if not specified, the system will ask the Player what type of rest is to be undertaken - though Long Rests will be disabled if the Timescale (either the optional value or the character sheet attribute) is not 1 or more days (see below). The type of magic to be affected can also be specified or, if not specified, all types of magic are affected.

A Short rest is deemed to be for 1 hour (though this is not a restriction of the system and is up to the DM), and allows spell casters (such as Wizards and Priests, as well as others) to regain their 1st level spells only. This can happen as often as the DM allows.

A Long rest is considered to be an overnight activity of at least 8 hours (though again this is not a restriction of the system and is up to the DM). A Long rest allows spell casters to regain all their spells, all character and magic item powers to be regained to full uses per day, and for recharging magic items to regain their charges up to their current maximum. After a long rest, ammunition that has been used but not recovered can no longer be recovered using the Ammunition Management command (see AttackMaster API documentation): it is assumed that other creatures will have found the ammo, or it has been broken or otherwise lost in the 8 hours of the long rest.

A Long rest can only be undertaken if certain conditions are met: either the optional Timescale (in days) must be specified as 1 or more days, or the Character Sheet must have a Roll20 attribute called Timescale, current, set to a value of 1 or more (can be set by InitiativeMaster API --end-of-day command). An internal date system is incremented: an attribute on the Character Sheet called In-Game-Day is incremented by the Timescale, and Timescale is then set to 0.

If the InitMaster API is being used, the system will interact with the “End of Day” command to allow rests to be coordinated with the choice of accommodation (and its cost…!).

Treasure & Item container management

DM/GM version of Magic Item management

--gm-edit-mi [token_id]

Takes an optional token ID. If token ID is not specified, uses the selected token.

This command opens a menu showing all the items in the Backpack of the character sheet associated with the specified token. Unlike the Player version of the command (--edit-mi), this command shows all attributes of every magic item, including those of hidden and cursed items, and also offers an additional list of “DM Only” magic items from the magic item databases.

The following functions are available once both a magic item is selected from the lists, and a slot to store it in are selected:

Search tokens for Magic Items and Treasure

--search token_id|pick_id|put_id

Takes a mandatory token ID, mandatory token ID of the token to search and pick up items from, mandatory token ID of the token to put picked up items in.

This command can be used to pick the pockets of an NPC or even another Player Character, as well as to loot magic item and treasure containers such as Chests and dead bodies. It can also be used for putting stuff away, storing items from the character's Magic Item Bag into a container, for instance if the MI Bag is getting too full (it is limited to the number of items specified via the --gm-edit-mi menu, though similar items can be stacked). The effect of this command when looting (i.e. the Character's token_id is also the put_id) depends on the Container Type of the searched token set by the DM using the -gm-edit-mi command menu:

Looting without searching, and storing items in a container

--pickorput token_id|pick_id|put_id|[SHORT/LONG]

Takes a mandatory token ID for the Player's character, a mandatory token ID for the token to pick items from, a mandatory token ID for the token to put items in to, and an optional argument specifying whether to use a long or a short menu.

This command displays a menu from which items in the Backpack Bag on the character sheet associated with the Pick token can be selected to put in the Bag of the character sheet associated with the Put token. The Player's character's token can be either the Put token (if picking up items from a container) or the Pick token (if storing items from their Bag into the container). The other token can be another Player Character (useful for one character giving a magic item to another character) or any other selectable token with a character sheet. No traps or sentient being checks are made by this command - this allows the DM to allow Players to bypass the searching functionality when looting a container or storing items in it. Note: the Player's Magic Item menu (accessed via the -mimenu command) does not have an option to loot without searching, but the Store function on that menu does not use Search.

There are two forms of this menu - the Long form displays all items in the container as individual buttons for the Player to select from, and a single button to store the item: this is generally OK when looting containers with not much in them. The Short form of the menu shows only two buttons: one button which, when clicked, brings up a pick list of all the items in the Pick container, and another button to store the item in the Put container: this is generally best for when a character is storing something from their MI Bag into a chest or other container, or giving an MI to another character, as a character's MI Bag often has many items in it which can make a Long menu very long. Each type of menu has a button on it to switch to the other type of menu without re-issuing the command. If not specified in the command, the type of menu the Player last used in this campaign is remembered and used by the system.

Light source management

These functions use Roll20 Dynamic Lighting to provide a token with a light source. If your campaign does not use Dynamic Lighting, they will not function. They can also be accessed through the menu displayed by the AttackMaster API -other-menu command.

Show a menu of Light Sources to select from

--lightsources [token_id]

Takes an optional token ID as an argument. If token ID is not specified, uses the selected token.

This command brings up a menu showing a selection of various light sources that a character can use. Selecting one will change the Roll20 Dynamic Lighting values on the Token identified to provide this lighting effect. These are:

• Magic Weapon or Magical Armour (5ft radius circle),
• Torch (15ft radius circle),
• Hooded Lantern (30ft radius circle),
• Continual Light lantern (60ft radius circle),
• Bullseye Lantern (cone of light, 20 degrees wide and 60ft long),
• Beacon Lantern (cone of light, 20 degrees wide and 240ft long).

The menu shows [ON] and [OFF] buttons for each type. Only one type can be ON for each Token: selecting an ON button for any light source turns OFF the others for that Token. Turning the current light source off will turn off all lighting effects on the identified token.

Set a lightsource for a token

--changelight token_id|(NONE/WEAPON/TORCH/HOODED/CONTLIGHT/BULLSEYE/BEACON)

Takes a mandatory token ID, and a mandatory type of light source.

This command sets the light source type that the identified token is using, and changes the Roll20 Dynamic Lighting settings of the token to the relevant value shown under the previous section, or turn off all lighting effects for the selected token if NONE is specified.

Other commands

Display help on these commands

--help

This command does not take any arguments. It displays the mandatory and optional arguments, and a brief description of each command.

Configure API behavior

--config [PROF/ALL-WEAPS/WEAP-CLASS/ALL-ARMOUR/MASTER-RANGE/SPECIALIST-RULES/SPELL-NUM] | [TRUE/FALSE]

Takes two optional arguments, the first a switchable flag name, and the second TRUE or FALSE.

Allows configuration of several API behaviors. If no arguments given, displays menu for DM to select configuration. Parameters have the following effects:

Check database completeness & integrity (GM only)

--check-db [ db-name ]

Takes an optional database name or part of a database name: if a partial name, checks all character sheets with the provided text in their name that also have '-db' as part of their name. If omitted, checks all character sheets with '-db' in the name. Not case sensitive. Can only be used by the GM.

This command finds all databases that match the name or partial name provided (not case sensitive), and checks them for completeness and integrity. The command does not alter any ability macros, but ensures that the casting time ('ct-') attributes are correctly created, that the item lists are sorted and complete, and that any item-specific power & spell specifications are correctly built and saved.

This command is very useful to run after creating/adding new items as ability macros to the databases (see section 11 below). It does not check if the ability macro definition itself is valid, but if it is then it ensures all other aspects of the database consistently reflect the new ability(s).

Switch on or off Debug mode

--debug (ON/OFF)

Takes one mandatory argument which should be ON or OFF.

The command turns on a verbose diagnostic mode for the API which will trace what commands are being processed, including internal commands, what attributes are being set and changed, and more detail about any errors that are occurring. The command can be used by the DM or any Player - so the DM or a technical advisor can play as a Player and see the debugging messages.

Forcing a database reset to the API version

A database can be rebuilt as the version that came with the current version of the API if you have accidentally altered one of the Ability macros or an attribute and caused functions not to work as expected. The easiest way to achieve this is to find the offending database Character Sheet and delete it, then exist the campaign and re-enter. If and only if the database Character Sheet is one of the following, it will be automatically re-written as the version distributed with the API:

MI-DB, MI-DB-Weapons, MI-DB-Ammo, MI-DB-Armour, MI-DB-Potions, MI-DB-Scrolls-Books, MI-DB-Wands-Staves-Rods, MI-DB-Rings, MI-DB-Light, MU-Spells-DB, PR-Spells-DB, Powers-DB.

Using Character Sheet Ability/Action buttons

The most common approach for the Player to run these commands is to use Ability macros on their Character Sheets which are flagged to appear as Token Action Buttons: Ability macros & Token Action Buttons are standard Roll20 functionality, refer to the Roll20 Help Centre for information on creating and using these.

In fact, the simplest configuration is to provide only Token Action Buttons for the menu commands: --spellmenu and mimenu. From these, most other commands can be accessed.

Configuring the Token and Character Sheet for use with the API

Split this section into separate Wiki page Richard @ Damery (talk) 18:49, 4 April 2022 (UTC)

At the time of writing this Wiki, the RPGMaster APIs, including MagicMaster, are initially configured and distributed to support the Advanced Dungeons & Dragons 2nd Edition RPG and matching Advanced 2nd Edition Character Sheet on Roll20. The Character Sheets and tokens that represent them are best set up for game play by using the facilities provided by the APIs, and especially those menus and commands provided by the CommandMaster API. However, if desired, it is possible to set up Character Sheets and tokens manually (especially if not using all the APIs): instructions on how to achieve this are provided in the RPGMaster Character Sheet and Token setup Handout and Wiki page.

The APIs are currently capable of being adjusted to support any RPG and Character Sheet by adjusting the mappings and database entries supplied as default, but at present this is a significant task. The RPGMaster Character Sheet and Token Setup handout & Wiki, and the individual database help handouts and wiki pages provide information on how to do this. A future development currently planned (but with no date for release) is to reprogram the APIs to include a RPG-defining Library API, one for each supported game system, that will include the RPG rules for the RPGMaster APIs and adjust the API behaviours to work for the RPG the Library is for.

MagicMaster Databases

General Database information

The MagicMaster API uses a number of Character Sheets as databases to hold Ability Macros defining spells, powers and magic items and their effects. The API is distributed with many spell, power & magic item definitions, and checks for, creates and updates these Character Sheet databases on start-up. DMs can add their own weapons, ammo and armour to additional databases, but the databases provided are totally rewritten when new updates are released so the DM must add their own database sheets. If the provided databases are accidentally deleted, they will be automatically recreated the next time the Campaign is opened. Additional databases should be named as follows:

However: the system will ignore any database with a name that includes a version number of the form “v#.#” where # can be any number or group of numbers e.g. MI-DB v2.13 will be ignored. This is so that the DM can version control their databases, with only the current one (without a version number) being live.

There can be as many additional databases as you want. Other Master series APIs come with additional databases, some of which overlap - this does not cause a problem as version control and merging unique macros is managed by the APIs.

Important Note: all Character Sheet databases must have their 'ControlledBy' value (found under the [Edit] button at the top right of each sheet) set to 'All Players'. This must be for all databases, both those provided (set by the API) and any user-defined ones. Otherwise, Players will not be able to run the macros contained in them.

Each database has a similar structure, with:

• Ability Macros named as the spell, power or magic item specified, and used to describe and provide effects for spells, powers and magic items using the commands in the Magic Master API;
• Custom Attributes with the attribute name “ct-ability-macro-name”, one per Ability Macro, which defines the casting time and casting cost for spells & powers, and speed and MI type for magic items;
• An entry in a list on the character sheet in the spell book of the relevant Character Sheet tab (Spell Level of the spell defined, Powers tab, or various spell books for different Magic Items - see MI entry below).

Ability Macros can be whatever the DM wants and can be as simple or as complex as desired. Roll Templates are very useful when defining spell, power and magic item ability macros. When a Player or an NPC or Monster views or casts a spell, power or uses a magic item the Magic Master API runs the relevant Ability Macro from the databases as if it had been run by the Player from the chat window. All Roll20 functions for macros are available.

Replacing Spells & Items

If you want to replace any spell or item provided in any of the databases, you can do so simply by creating an Ability Macro in one of your own databases with exactly the same name as the provided item to be replaced. The API gives preference to Ability Macros in user-defined databases, so yours will be selected in preference to the one provided with the APIs.

Spells and Powers Databases

Spells/Powers databases are all character sheets that have names that start with

Wizard Spells: MU-Spells-DB-[added name]
Priest Spells: PR-Spells-DB-[added name]
Powers: Powers-DB-[added name]

Those with version numbers of the form v#.# as part of the name will be ignored.

As previously stated, each spell or power definition has 3 parts in the database (see Section 11.1): an Ability Macro with a name that is unique and matches the spell or power, an Attribute with the name of the Ability Macro preceded by “ct-“, and a listing in the database character sheet of the ability macro name separated by '|' along with others of the same level in the spell book of the level of the spell or power. The quickest way to understand these entries is to examine existing entries. Do go to the root databases and take a look (but be careful not to alter anything unless you know what you're doing!)

Note: The DM creating new spells and powers does not need to worry about anything other than the Ability Macro in the database, as running the command --check-db will update all other aspects of the database appropriately for all databases, as long as the Specs and Data fields are correctly defined. Use the name of the particular database as a parameter to check and update just that database. Running the command --check-db with no parameters will check and update all databases.

Ability macros can be added to a database just by using the [+Add] button at the top of the Abilities column in the Attributes and Abilities tab of the Database Character Sheet, and then using the edit “pencil” icon on the new entry to open it for editing. Ability macros are standard Roll20 functionality and not dependent on the API. Refer to the Roll20 Help Centre for more information.

The Ability Macro for a spell may look something like this:

Sleep

/w "@{selected|character_name}" &{template:2Espell}{{title=@{selected|casting-name} casts Sleep as a level @{selected|casting-level} caster}}{{splevel=Level 1 Wizard}}{{school=Enchantment/Charm}}Specs=[Sleep,MUspellL1,1H,Enchantment-Charm]{{range=90 ft}}{{components=V, S, M}}{{duration=[[5*({10,@{selected|casting-level}}kl1)]] Rounds}}{{time=1}}{{aoe=[30ft Cube](!rounds --aoe @{selected|token_id}|square|feet|90|30||dark)}}{{save=None}}{{damage=[Sleep them](!rounds --target area|@{selected|token_id}|@{target|Select who to sleep|token_id}|Sleep|[[5*({10,@{selected|casting-level}}kl1)]]|-1|Snoring away, shake to awaken|sleepy)}}SpellData=[w:Sleep,lv:1,sp:1,gp:0.01,cs:VSM]{{effects=Up to [2d4](!\ \/r 2d4) Hit Dice of creatures with 4 HD or less are put to sleep beginning with the lowest HD creatures in the Area of Effect.}}{{materials=a pinch of fine sand, rose petals, or a live cricket.}}

The ability specification for this Sleep spell uses a Roll20 Roll Template, in this case defined by the Advanced D&D 2e Character Sheet by Peter B (see the documentation for the Character Sheet on Roll20 for specifications of this Roll Template), but any Roll Template you desire can be used, or none and just plain text. The entries in the Roll Template itself can be anything you desire, giving as much or as little information as you want. However, the important elements for the MagicMaster API are those highlighted. In red, two API buttons grant the player access to run RoundMaster API commands to show the Area of Effect of the spell, and then to mark affected tokens with a "Sleepy" status. Each of the elements important to the database are inserted between the elements of the Roll Template, meaning they will not be seen by the player when the macro is run. Generally spaces, hyphens and underscores in the data elements are ignored, and case is not significant. Each element is described below:

Specs = [Type, Class, Handedness, Spell School]

The Specs section describes what spell type and school this spell belongs to. These fields must be in this order. This format is identical for all database items, whether in these databases or others used by the Master series of APIs.

SpellData=[w:Sleep,lv:1,sp:1,gp:0.01,cs:VSM]

The SpellData section specifies the data relating to the use of the spell. These fields can be in any order.

The casting time (or speed) sp: can be negative, meaning it gives a negative modifier to individual initiative (if InitMaster API is being used). It can also be greater than 10 segments, meaning it takes longer than 1 Round to cast. Multiply the number of Rounds it will take to cast by 10, or the number of Turns it will take to cast by 100 (if using the InitMaster API the rounds will be automatically counted down and the spell actually cast in the appropriate round, unless the casting is interrupted). It can also be a dice roll specification, which will be rolled at the point that a character selects the spell, power or item to use in a particular round, which means the speed can vary from round to round. Potions are always of this nature (see the AD&D2e DMG p141).

The cost of material components, gp:, is deducted from the Caster's money on their Character Sheet each time the spell is cast. The GM is informed of the spell being cast, by whom, and how much money it cost and how much money the Caster has left for each casting.

The components of the spell, cs:, is currently not used and is for future expansion capabilities.

The Ability Macro for a Power may look something like this:

Turn Undead

/w "@{selected|character_name}" &{template:2Espell}{{title=@{selected|token_name} attempts to Turn Undead as a level @{selected|pr-casting-level} @{selected|class3}}}{{splevel=Power}} {{school=Necromancy}}Specs=[Turn-Undead,Power,1H,Necromancy]{{components=V,S}}{{time=[[10]]}}{{range=0}}{{duration=Until broken}}{{aoe=Undead within line of sight}}{{save=See turning table}}{{reference=PHB p103}}{{damage=[Turn It](!rounds --target area|@{selected|token_id}|@{target|Select undead|token_id}|Turned|99|0|Turned undead, flee if free-willed, stand aside if controlled|screaming)}}SpellData=[w:Turn Undead, sp:10, cs:VS]{{effects=Remember that Paladins turn as a Priest of 2 levels lower.
Attempting to turn counts as an action, requiring one round and occurring during the character's turn in the initiative order (thus, the undead may get to act before the character can turn them). The mere presence of the character is not enough--a touch of drama from the character is important. Speech and gestures are important, so the character must have his hands free and be in a position to speak. However, turning is not like spellcasting and is not interrupted if the character is attacked during the attempt.
To resolve a turning attempt, look on Table 61. Cross-index the Hit Dice or type of the undead with the level of the character (two levels lower for a paladin). If there is a number listed, roll 1d20. If the number rolled is equal to or greater than that listed, the attempt is successful. If the letter "T" (for "turned") appears, the attempt is automatically successful without a die roll. If the letter "D" (for "dispel") is given, the turning utterly destroys the undead. A dash (--) means that a priest or paladin of that level cannot turn that type of undead. A successful turn or dispel affects 2d6 undead. If the undead are a mixed group, the lowest Hit Dice creatures are turned first.
Only one die is rolled regardless of the number of undead the character is attempting to turn in a given round. The result is read individually for each type of undead.}}{{material=The Priest's holy symbol}}

Essentially, Powers are just Spells by another name, that can be cast multiple times per day, and are innate to the Character's class, or to a creature. The specification is, therefore, almost identical to a spell. In the author's campaigns, Powers do not consume material components and therefore do not cost money to use (except in rare circumstances) hence there being no gp: specification (it defaults to 0gp), but other DMs can add material costs for Powers if desired. Powers are all 1 level, hence no lv: specification.

Magic Item Databases

Magic Item databases are all character sheets that have names such as

Magic Items: MI-DB-[added name]

And can have anything put at the end, though those with version numbers of the form v#.# as part of the name will be ignored.

As previously stated and as for other magic, each magic item definition has 3 parts in the database (see Section 11.1): an Ability Macro with a name that is unique and identifies the magic item, an Attribute with the name of the Ability Macro preceded by “ct-“, and a listing in the database character sheet of the ability macro name separated by '|' along with others of the same magic item type, which is one of: Potion, Scroll, Rod/Stave/Wand, Weapon, Armour, Ring, Miscellaneous, and also DM Only magic items. The quickest way to understand these entries is to examine existing entries. Do go to the root database and take a look (but be careful not to alter anything unless you know what you're doing!)

Note: The DM creating new spells and powers does not need to worry about anything other than the Ability Macro in the database, as running the command --check-db will update all other aspects of the database appropriately for all databases, as long as the Specs and Data fields are correctly defined. Use the name of the particular database as a parameter to check and update just that database. Running the command --check-db with no parameters will check and update all databases.

Ability macros can be added to a database just by using the [+Add] button at the top of the Abilities column in the Attributes and Abilities tab of the Database Character Sheet, and then using the edit “pencil” icon on the new entry to open it for editing. Ability macros are standard Roll20 functionality and not dependent on the API. Refer to the Roll20 Help Centre for more information.

The Ability Macro may look something like this:

Oil-of-Etherealness

/w "@{selected|character_name}" &{template:2Espell}{{title=Oil of Etherealness}} {{splevel=Oil}} {{school=Alteration}}Specs=[Oil of Etherealness,Potion,1H,Alteration]{{components=M}}{{time=[[3]] rounds after application}}PotionData=[sp:30,rc:charged]{{range=User}}{{duration=4+1d4 turns}} {{aoe=User}} {{save=None}} {{healing=[Become Ethereal](!rounds --target single|@{selected|token_id}|@{target|Select a target|token_id}|Oil-of-Etherealness|[[10*(4+1d4)]]|-1|Ethereal|Ninja-mask)}}{{effects=This potion is actually a light oil that is applied externally to clothes and exposed flesh, conferring etherealness. In the ethereal state, the individual can pass through solid objects in any direction—sideways, upward, downward—or to different planes. The individual cannot touch non-ethereal objects.
The oil takes effect three rounds after application, and it lasts for 4+1d4 turns unless removed with a weak acidic solution prior to the expiration of its normal effective duration. It can be applied to objects as well as creatures. One potion is sufficient to anoint a normal human and such gear as he typically carries (two or three weapons, garments, armor, shield, and miscellaneous gear). Ethereal individuals are invisible.}}{{materials=Oil}}

You might notice that the structure of this macro is extremely similar to that of a spell: indeed, it uses the same Roll Template. As this is an Oil that achieves the same effect as a spell, this is not surprising.

However, there is one new field in the data section (in this case called the PotionData section):

All magic items have a recharging/curse type: for details, see the --gm-edit-mi command in the MagicMaster API help documentation, section 7.1. If not supplied for a magic item definition, it defaults to uncharged. Generally, items in the database are not cursed-, but can have their type changed to cursed or some recharging cursed type when the DM stores them in a container or gives them to a Character using the --gm-edit-mi command.

Other magic items might use different structures, and be more complex:

Bead-of-Force

/w "@{selected|character_name}" &{template:2Edefault}{{name=Bead of Force}}{{subtitle=Magic Item}}Specs=[Bead of Force,Miscellaneous,1H,Evocation]{{Speed=[[0]]}}MiscData=[w:Bead of Force,sp:0,rc:charged]{{Size=Tiny}}{{Range=[Up to 30yds](!rounds --aoe @{selected|token_id}|circle|yards|0|60||dark|true)}}{{damage=[5d4](! /gmroll 5d4 damage from Bead of Force in 10ft redius) damage in 10ft radius}}{{duration=3d4 rounds}}{{Save=[To escape sphere](! /gmroll 1d20 Save vs. spell or captured in *Sphere of Force*)}}{{Effect=[Trapped in Sphere](!rounds --target area|@{selected|token_id}|Bead-of-Force|8|-1|'Held in Sphere of Force'|fishing-net)}}{{desc=These small, black spheres might be mistaken for common beads, marbles, or unusually black but lusterless pearls. From 5-8 of these beads are usually found at one time. Each is about three-quarters of an inch in diameter and quite heavy, weighing almost an ounce. One can be hurled up to 30 yards.
Upon impact, the bead sends forth a burst of force that inflicts 5d4 points of damage upon all creatures within a 10-foot radius of its center. Each victim is allowed a saving throw vs. spell. Those who save will be thrown out of the blast area, but those who fail to save will be encapsulated by a sphere of force after taking damage.
The sphere will form around any and all such creatures in the 10-foot-radius area, even those of large size, and will persist for 3d4 rounds. Victims will be unable to escape except by the same means and used to bring down a wall of force spell.}}

The Bead of Force ability macro uses a Default Roll Template, which means the only mandatory field is the {{name=}} field, and the DM can define any other fields they want to describe and enact the magic item. Here, an API button exists to do a saving throw with documented outcomes, and another API button can target an area with multiple tokens in to entrap them (if the DM rejects or confirms as they make or fail each saving throw).

Magic Items with Powers or Spell-Storing

Some magic items, especially artefacts and sentient items, can store spells and/or have powers similar to characters. MagicMaster supports magic items of this type to a degree, although there are inevitably exceptions that the DM will have to get creative in their development! These items use API buttons that call various MagicMaster commands to deliver their capabilities.

First to note is that items that have powers and spells use spell slots in the owning character's character sheet. These spell slots should not be used by characters in your campaign. If they are, errors might occur. By default, on the AD&D2E character sheet the system uses Wizard Level 14 spell slots for magic item powers, and Wizard Level 15 spell slots for spell-storing magic items. As standard AD&D2E only has spells up to level 9 this generally works without causing problems.

Next, in addition to the three standard elements of the Ability Macro, the 'ct-' attribute and the listing, these items require a 4th element which specifies their powers and spells. These are:

In each case the [item-name] is replaced by the Ability macro name (which is not case sensitive).

Note: The DM creating new spell storing or power wielding magic items does not need to worry about anything other than the Ability Macro in the database, as running the command --check-db will update all other aspects of the database appropriately for all databases, as long as the Specs and Data fields are correctly defined. Use the name of the particular database as a parameter to check and update just that database. Running the command --check-db with no parameters will check and update all databases.

When a spell-storing or power wielding magic item is added to a magic item bag or container using --edit-mi or --gm-edit-mi, these attributes are added to the character sheet and also they are parsed by the system and the spells and/or powers are created in the relevant spell books automatically. When such an item is found in a container by a character, or passed from character to character, all of the stored spells & powers are deleted from the old character and created in the new character. A character gaining such an item can use its spells and powers immediately.

Here is an example of a power wielding magic item:

Ring-of-Shooting-Stars

!setattr --silent --sel --casting-level|1 --casting-name|@{selected|token_name}'s Ring of Shooting Stars
/w "@{selected|character_name}" &{template:2Edefault}{{name=Ring of Shooting Stars}}{{subtitle=Ring}}Specs=[Ring of Shooting Stars,Ring,1H,Evocation]{{Speed=[[5]]}}RingData=[w:Ring of Shooting Stars,sp:5,rc:charged,ns:6], [cl:PW,w:RoSS-Dancing-Lights,sp:5,pd:12], [cl:PW,w:RoSS-Light,sp:5,pd:2], [cl:PW,w:RoSS-Ball-Lightning,sp:5,pd:1], [cl:PW,w:RoSS-Shooting-Stars,sp:5,pd:3], [cl:PW,w:RoSS-Faerie-Fire,sp:5,pd:2], [cl:PW,w:RoSS-Spark-Shower,sp:5,pd:1] {{Size=Tiny}} {{Immunity=None}} {{Resistance=None}} {{Saves=None}} {{desc=This ring has two modes of operation—at night and underground—both of which work only in relative darkness.
During night hours, under the open sky, the shooting stars ring will perform the following functions:
• [*Dancing lights*](!magic --mi-power @{selected|token_id}|RoSS-Dancing-Lights|Ring-of-Shooting-Stars|1) as spell (once per hour).
• [*Light*](!magic --mi-power @{selected|token_id}|RoSS-Light|Ring-of-Shooting-Stars|1), as spell (twice per night), 120-foot range.
• [*Ball lightning*](!magic --mi-power @{selected|token_id}|RoSS-Ball-Lightning|Ring-of-Shooting-Stars|1), as power (once per night).
• [*Shooting stars*](!magic --mi-power @{selected|token_id}|RoSS-Shooting-Stars|Ring-of-Shooting-Stars|1), as power (special).
Indoors at night, or underground, the ring of shooting stars has the following properties:
[*Faerie fire*](!magic --mi-power @{selected|token_id}|RoSS-Faerie-Fire|Ring-of-Shooting-Stars|1) (twice per day) as spell
[*Spark shower*](!magic --mi-power @{selected|token_id}|RoSS-Spark-Shower|Ring-of-Shooting-Stars|1) (once per day) as power
Range, duration, and area of effect of functions are the minimum for the comparable spell unless otherwise stated. Casting time is 5}}

Note that the ability macro starts with a call to the ChatSetAttr API to set the casting-level to 1 and the name of the caster to be <Character-name>'s Ring of Shooting Stars. Not strictly necessary, but a nice cosmetic.

The data section now includes repeating data sets, one for each of the powers that the item has:

RingData=[w:Ring of Shooting Stars,sp:5,rc:charged,ns:6], [cl:PW,w:RoSS-Dancing-Lights,sp:5,pd:12], … 

The first data set is very similar to the standard magic item data, with the addition of the ns: field, and is then followed by a number of repeated data sets specifying each of the powers:

By running the --check-db command (see section 9 and the note above) these data sets are used to correctly set up the database with the powers wielded, so that when a Character receives this item, the Character also gains the powers to use through the item.

Note: if a Character picks up two Power-wielding items with exactly the same item name (i.e. two copies of the same item) the results are unpredictable. This is best avoided.

Feel free to just copy the specification for a Ring-of-Shooting-Stars in the Rings database and save it to a new Ability Macro with a different name, and then alter the power names, speeds, and uses per day, as well as the API Button --mi-power commands and the other text, to form new power-wielding magic items. Also, the Ring does not have to have 6 powers - just remove or add one or more repeating data sets to reduce or increase the number of powers.

Here is an example of a spell-storing magic item:

Ring-of-Spell-Storing-HHSLS

/w "@{selected|character_name}" &{template:2Edefault}{{name=Ring of Spell Storing with Haste x2, Slow, Light & Sleep}}{{subtitle=Ring}}Specs=[Ring of Spell Storing,Ring,1H,Conjuration-Summoning]{{Speed=[[5]] regardless of spell}}RingData=[w:Ring of Spell Storing HHSLS,sp:5,rc:uncharged,ns:5], [cl:MU,w:Haste,sp:5,lv:6], [cl:MU,w:Haste,sp:5,lv:6], [cl:MU,w:Slow,sp:5,lv:7], [cl:MU,w:Light,sp:5,lv:3], [cl:MU,w:Sleep,sp:5,lv:3] {{Size=Tiny}}{{Store spell=[Store Priest Spell](!magic --mem-spell MI-PR|@{selected|token_id})
[Store Wizard Spell](!magic --mem-spell MI-MU|@{selected|token_id})}}{{Cast spell=[View](!magic --view-spell mi-muspells|@{selected|token_id}) or [Cast](!magic --cast-spell MI|@{selected|token_id}) spells}}{{desc=A ring of spell storing contains 1d4+1 spells which the wearer can employ as if he were a spellcaster of the level required to use the stored spells. The class of spells contained within the ring is determined in the same fashion as the spells on scrolls (see "Scrolls"). The level of each spell is determined by rolling 1d6 (for priests) or 1d8 (for wizards). The number rolled is the level of the spell, as follows:
Priest: 1d6, if 6 is rolled, roll 1d4 instead.
Wizard: 1d8, if 8 is rolled, roll 1d6 instead.
Which spell type of any given level is contained by the ring is also randomly determined.
The ring empathically imparts to the wearer the names of its spells. Once spell class, level, and type are determined, the properties of the ring are fixed and unchangeable. Once a spell is cast from the ring, it can be restored only by a character of appropriate class and level of experience (i.e., a 12th-level wizard is needed to restore a 6th-level magical spell to the ring). Stored spells have a casting time of 5.}}

This is a specific version of a Ring of Spell Storing. As the spells stored are specified in the macro, if you want there to be multiple rings of spell storing in your campaign they each need to be individually programmed (easy cut & paste job) & named differently.

The only new field in these data sets is:

The lv: field only specifies the level of the initial spell caster when the item is first found. Once owned and used, the level of the spell caster is recorded each time a spell is refreshed by casting into the item. As the item is then passed from one Character to another, or stored in a container and recovered later, the levels at which the spells were cast is retained. However, if the item is reloaded from the databases, or a duplicate of the item is placed by the DM and found by another character, that version of the item will have the spell caster levels from the database definitions. Note that if a single Character picks up two versions of exactly the same spell storing item (i.e. with the same item name) the results are unpredicable...

Feel free to just copy the specification for a Ring-of-Spell-Storing in the Rings database and save it to a new Ability Macro with a different name, and then alter the spell names and casting levels as desired, to form new Rings of Spell Storing or other magic items. Also, the Ring does not have to have 5 spells - just remove or add one or more repeating data sets to reduce or increase the number of stored spells (though the official definition of a Ring of Spell Storing states a maximum of 5 spells).

Weapons (if using AttackMaster API)

Weapons, magical or not, are special types of items in the Magic Items databases. If coded properly (in the same way as those in the MI-DB-Weapons database), they can be used with the AttackMaster API to implement fully automatic weapon management, the ability to hold weapons “in-hand” or sheathed, to have automatic ammo and range management for ranged weapons, automatic entry of weapons into the melee and/or ranged weapons tables, ready to make attacks with magical plusses and other specifications all set up, and support for dancing weapons (ones that can attack without being held by the Character), creatures with more than 2 hands, and 1-handed weapons, 2-handed weapons, and even weapons that need more than 2 hands!

See the Weapon & Armour Database Help handout and AttackMaster API documentation for how Weapon definitions should be structured for use with the AttackMaster API, which are just a few additions to the standard definition of an item.

Armour & Shields

Like weapons, armour and shields of all types (including magical armour like magical Bracers and Rings of Protection) can be coded to be used with the AttackMaster API to automatically calculate the appropriate AC for various scenarios (such as with & without Shield, from the back, if surprised, etc). This will take into account if the armour is valid for the character class, determine which is the best armour combination that the character has, if various armour elements can or can't work together, and add in Dexterity bonuses or impairments. It will also allow magical effects cast on the character to take effect or be adjusted via the token “circles” and highlight when such an effect is in place by showing the relevant token bar (only when there is a difference between the token AC and calculated AC).

See the Weapon & Armour Database Help handout and AttackMaster API documentation for how Armour & Shield definitions should be structured for use with the AttackMaster API, which are just a few additions to the standard definition of an item.

Also, see the RoundMaster API documentation for how magical effects can be placed on and affect tokens and characters.

Specs & Data field values

Below are lists of the current possible values for the item database Ability macro sections.

Specs sections

Specs=[Type, Item-Class, Handedness, Group-Type]

There are no default settings for any of the Specs data fields. All must be explicitly specified.

Spell Types

There is an infinite list of spell types: generally the type is the spell name.

Spell Item-Classes

Spell Handedness

0H A spell/power that does not take a hand (there is no Somatic component)
1H A spell/power that requires only 1 hand to cast (most spells are like this)
2H A spell/power that requires 2 hands to cast (perhaps a scroll must be held)
3H A spell/power that takes 3 hands… perhaps more than 1 caster together?
4H Etc No currently programmed spells use more than 2 hands
… …

Spell/Power Schools

Spell Schools are not currently checked by the system, but are required for future expansion for whether it can be used by a Character of a specific class, or if there are magical situations that suppress various spell types. Those implemented so far for the Spells databases are:

Abjuration, Alteration, Conjuration-Summoning, Enchantment-Charm, Divination, Illusion-Phantasm, Invocation-Evocation, Necromancy.

Note that the '/' in School names in the AD&D2e PHB have been replaced by hyphens. It is also allowed to use just one half of any hyphenated school name where appropriate. If a spell or power is of more than one school, separate each with a vertical bar character '|'

Magic Item Types

There is an infinite list of magic item types: generally the type is the magic item name. A magic item can have more than one type, with each separated by a vertical bar character '|'

Magic Item Classes

Armour Handedness

0H Items that do not require to be held to work (e.g. a Ring, Buckler or a Helm)
1H An item that must be held in one hand to work, such as a Wand
2H Items that need two hands to wield, like a Staff
3H Items that need three hands to use, perhaps by two characters… (not yet implemented)
… etc.

Item Schools

Currently, all Magic Items other than Weapons and Armour use the same set of magical schools as for Spells & Powers, as they mostly perform spell-like effects. See section 11.7.1.4 for the list.

Data Sections

Definitions for Data Section field types for Weapons & Armour can be found in the AttackMaster API documentation. Below are the definitions for Spell, Power & other Magical Item types.

Note: Always refer to the database specification definitions in other sections above for detailed information on the use of these Field specifiers. Not all specifiers have an obvious use.

Changelog

v1.047 (2022-02-02)

• Added --config command and menu for DM to alter some API behavior.
• Fixed Shocking Bracers LB error & enhanced Rage power
• Multiple weapon and magic item definition updates

v1.046 (2022-01-23)

• Fixed illegal characters not rendered by One-Click installation
• Corrected definitions of Spear and Lightning-Bolt
• Added menu for adding Spells & Powers to magic items

v1.045 (2022-01-14)

• Fixes to multiclass spell level calculation and non-MU/non-Priest spellcaster spell numbers
• Force container type to "Holds items" when adding items.

v1.044 (2022-01-09)

• First version for public release