Overview

I felt there needed to be a comprehensive jukebox control script. This script allows you to replicate all of the commands in the basic jukebox and then some via chat commands or a user interface that displays within chat. The script allows playlist functionality by importing all tracks and playlists from Jukebox into Roll20AM. There's an ability to create up to 4 dynamic playlists (called Tags) from individual tracks so you don't have to go back and manipulate Jukebox and import again into Roll20AM. The in-game help has been disabled for the time being because of the new User Interface, which makes building help around the UI a challenge.

The User Interface

The UI is designed so once you are in it, you won't have to execute Roll20AM commands. However, because dice rolls and player chats can fill up the chat window it's always handy to have a macro with !roll20AM --config ready to go to bring it back up.

Configuration Menu

Master Volume - Click on the volume level to set another default volume. This updates all playlists and tracks. Master volume is the loudness (0-100) that a track will start playing at.
Fade Time - Click on the seconds to set another default. This updates all playlists and tracks to the new fade time. Fade time is the number of seconds to fade in or fade out tracks.
Delayed - Click on the seconds to set another Delayed time. This updates all playlists and tracks. Delayed is the number of seconds to wait before anything is done with a track.
Playlists - Brings up the Playlists Menu, which shows all playlists you have defined in Jukebox.
Tracks - Brings up the Tracks Menu, which shows all tracks you have in Jukebox. If you have a lot of tracks, this menu can be a challenge to use
Tags - Brings up the Tags Menu, which shows 4 Tags (Tag 1 through Tag 4). Tags are "dynamic" playlists that enable you to assign any number of tracks into one of the 4 tags
Stop All Tracks - Stops audio for all tracks across all playlists
Import Jukebox - Brings in all Playlists from Jukebox, assigns all tracks in those Jukebox playlists to the Playlists in Roll20AM and brings in all other tracks that may not be assigned to Jukebox Playlists
Remove All - Cleans out Roll20AM by removing all playlists and tracks from Roll20AM. This does not affect Jukebox. Use this when you make a lot of changes to your Jukebox Playlists. This is also needed when there is a schema change in Roll20AM. Check Schema version at the top of the script. Viewed By - Ability to assign control of Roll20AM to a single or all players. Roll20AM menus may be viewed by: GM (Only), All (all players), Individual Player (drop list list of players to choose from). Access - Ability to give that person access to selective or all tracks: None (no player access to tracks or playlists), Full (full access to tracks or playlists), Limited (GM has to go through tracks and playlists and click the padlock icon in order to enable access) Menu Display - Ability to turn off all menu display EXCEPT for the config menu. That will always come up so you can turn back on Menu display. This removes the requirement for the nomenu command in Macros

Audio Master Controls

Playlist or Tag Name - click on it to view the tracks assigned to the Playlist or Tag
Volume - clicking on the current volume level brings up a roll query where you can enter a new volume. This volume will be applied to the playlist and all tracks in the playlist. It does not change the volume of tracks that are playing
Fade Time - click on the number of seconds brings up a roll query where you can enter a new fade time (in seconds). This is applied to all tracks in the playlist/tag, if clicked there, or to an individual track, if clicked there. Fade time is used to determine time it takes to fade in and fade out a track
Delayed Time - click on the number of seconds to bring up a roll query where can enter a new delayed time (in seconds). This is applied to all tracks in the playlist/tag, if clicked there, or to an individual track, if clicked there. Delayed time determines the number of seconds to wait until the next Roll20AM action is taken.
Play/Stop Button - click on play to start the track. The playlist will turn green to show it's running and a stop button will appear to stop the playlist whenever you wish. Click on the stop button to stop the track. The playlist will turn back to red to show it's stopped and the play button will appear to start it again
Fade In/Fade Out Button - click on this to fade in the track. The sound will gradually increase from 0 to the current track volume based on the Fade Time. The playlist will turn from red to green to show it's running and the fade out button will display. Click the fade out button to fade out the track
Decrease Volume - click on this once or multiple times to reduce the volume of the track. If the track is playing, it will reduce the volume of the playing track
Increase Volume - click on this once or multiple times to increase the volume of the track. If the track is playing, it will increase the volume of the playing track
Mode - click on this to set the mode of the Playlist/Tag/Track

• Single - Plays a single track and stops
• Loop - Plays through all songs in order and will start again with first song when it has played all songs
• Random - Randomly chooses a song to play and will continue to randomly choose other songs until the playlist is stopped or faded out. Not available for Tracks
• Shuffled - Uses an method to shuffle the tracks and then will play through all songs in a shuffled order. Not available for Tracks
• Together - Plays all tracks in the playlist at once. Not available for Tracks

Unlock Track- click on this to enable player access to the playlist. Players can't see the Roll20AM menus, but they can issue macro commands against the playlist. The icon changes from locked to unlocked. Click on the unlock icon to lock the playlist again
Remove Track - click on this to remove the track from Roll20AM
Tags

• Tag 1 - click on this to assign the track to Tag 1. The icon changes to a check mark. Click on the check mark again if you want to remove it from Tag 1
• Tag 2 - click on this to assign the track to Tag 2. The icon changes to a check mark. Click on the check mark again if you want to remove it from Tag 2
• Tag 3 - click on this to assign the track to Tag 3. The icon changes to a check mark. Click on the check mark again if you want to remove it from Tag 3
• Tag 4 - click on this to assign the track to Tag 4. The icon changes to a check mark. Click on the check mark again if you want to remove it from Tag 4

Return Button - This button will display the previous menu. If you are on the Tracks View, it will return to Configuration. If you are on Playlist/Tags View, it will return to Configuration. If you are on Playlist or Tag Tracks View, it will return to the Playlists or Tags View.

Using the Script

Basic Syntax

The contents of a command will change based on what you are doing, but the basic format will always look like this:
!roll20AM - case sensitive and all commands must start with this
Actions (must come after !roll20AM and preceeded by --, for example, --audio or --edit or --config

• --audio - starts all audio related activities (play/stop, fade, etc)
• --edit - starts all edit activities (changes volume, fade time, etc)
• --config - displays menus or imports jukebox into Roll20AM or removes everything from Roll20AM
  

Commands - play,stop,fade,in,out,increase,decrease are a small list of sample commands
| - all commands must have a '|' character at the end. This is required. Everything after the '|' will be a comma delimited lists of Playlists, Tags, Tracks or any combination and must match the name of the Playlist, Tag, or Track. You can also not provide anything after the '|' in some cases

Example:

• !roll20AM --audio,play|Wind

Audio Commands

play - starts a track using the tracks current volume
stop - stops a track that is playing. If no Playlists, Tags or Tracks follow the '|', then it will stop all Playlists, Tags or Tracks
fade - this starts either a fade in or fade out

• in - fades in the Track from 0 to current volume level
  
• out - fades out the Track from current volume level to 0
  

increase - increases both the volume of the Playlist, Tag or Track by 5% and any tracks that are currently playing
decrease - decreases the Track from current volume level by 5% and any tracks that are currently playing

Examples

• !roll20AM --audio,play|Fallout - Underground Troubles
• !roll20AM --audio,stop|Fallout - Underground Troubles
• !roll20AM --audio,fade,in|Battle (fades in the playlist)
• !roll20AM --audio,stop| (stops all tracks)

Edit Commands (GM Only)

access

• player - opens the Playlist, Tag or Track for player access (they can issue roll20 commands against it)
• gm - locks the Playlist, Tag or Track from player access (roll20 commands will be rejected)

mode

• single - sets the Playlist, Tag or Track mode to single. For Playlists or Tags, it will play a singe track starting with first (open the Playlist or Tag to view current track order) and then stop. If you start the Playlist or Tag again, it will play the next track in order. For a track, it will play the track once and then stop.
• loop - sets the Playlist, Tag or Track mode to loop. For Playlists or Tags, it will play each track in order (open the Playlist or Tag to view current track order) and will continue to play each tracks, starting from the beginning if all tracks have been played, until the Playlist or Tag is stopped or faded out. For a track, it will play the track continuously until the track is stopped or faded out.
• random - sets the Playlist, Tag or Track mode to random. For Playlists or Tags, it will play a completely random track and continue to play more random tracks until the Playlist or Tag is stopped or faded out. This mode isn't available when setting a Track mode.
• shuffled - sets the Playlist, Tag or Track mode to shuffled. For Playlists or Tags, it will shuffle the Playlist or Tag and then play each track in shuffled order until the Playlist or Tag is stopped or faded out. This mode isn't available when setting a Track mode.
• together - sets the Playlist, Tag or Track mode to together. For Playlists or Tags, It will play all tracks in the Playlist or Tag at once. Fade Out will fade out all tracks and stop will stop all tracks. This mode isn't available when setting a Track mode.

volume,level=<0-100> - sets the volume level for the playlist or track. If playlist or track is not provided sets the volume level for ALL playlists and tracks
fade,time=<number of seconds> - sets the fade time for the playlist or track. If playlist or track is not provided sets the fade time for ALL playlists and tracks. Fade time is used to fade in or fade out a playlist or track.
delayed,time:<number of seconds> - sets the delay time for the playlist or track. If playlist or track is not provided sets the delay time for ALL playlists and tracks. Delay time is used to force a track or playlist from starting based on the delayed number of secondsk.
set (used for tracks only)

• tag1 - sets a track into Tag List 1
• tag2 - sets a track into Tag List 2
• tag3 - sets a track into Tag List 3
• tag4 - sets a track into Tag List 4

unset (used for tracks only)

• tag1 - removes a track from Tag List 1
• tag2 - removes a track from Tag List 2
• tag3 - removes a track from Tag List 3
• tag4 - removes a track from Tag List 4

Examples:

• !roll20AM --edit,volume,level=50| (sets all playlists and tracks to 50)
  
• !roll20AM --edit,fade,time=10|11 - Drain You (sets the fade time to 10 seconds for this track)
  
• !roll20AM --edit,set,tag1|Stone Temple Pilots - Atlanta (sets this track into Tag 1 List)

Config Commands (GM Only)

If menu= is omitted from the --config command, Roll20AM will display the setup menu

menu=

tracks - display the tracks menu which shows all tracks current in Roll20AM

tags - display the 4 tag lists

playlists - displays all playlists currently in Roll20AM

<playlist name> - displays all tracks assigned to the playlist. The playlist name must be provided and match what is in Roll20AM

tag1 - displays all tracks assigned to tag1

tag2 - displays all tracks assigned to tag2

tag3 - displays all tracks assigned to tag3

tag4 - displays all tracks assigned to tag4

import - imports the Jukebox into Roll20AM. This will do incremental additions, so as long as your playlists names don't change, additional tracks will be added from Jukebox to the correct playlist. Tracks unassigned to playlists are brought in as well
remove - removes everything from Jukebox. This is recommended if large changes, new playlists, changed playlists exist in Jukebox. Run this command before running the import command

Examples:

• !roll20AM --config (displays the setup menu)
• !roll20AM --config,menu=Battle (displays the tracks assigned to the Battle Playlist)
• !roll20AM --config,menu=Tracks (displays all tracks in Roll20AM)
• !roll20AM --config,remove (removes everything from Roll20AM)
• !roll20AM --config,import (imports everything into Roll20AM from Jukebox)

Special Commands

delay - adding delay:<number of seconds> to any command will delay that command by the number of seconds. Delay is optional.
nomenu - Roll20AM will often issue menu refreshes to reflect a change in a track (for example, track started or track stopped). No menu prevents display of refresh menus. Add it to any audio command. It's optional

Changelog

Version 2.08

• Initial Deployment of new version of Roll20 Audio Master